DHCP Y NAT

DHCP Y NAT

PASO 1
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface Serial0/0/0
Router(config-if)#ip address 200.200.200.1 255.255.255.0
Router(config-if)#ip address 200.200.200.1 255.255.255.128

Router(config-if)#no shutdown

PASO 2
Router(config)#ip dhcp excluded-address 192.168.1.1 192.168.1.10
Router(config)#ip dhcp pool lan_A
Router(dhcp-config)#NETWORK 192.168.1.0 255.255.255.0
Router(dhcp-config)#DEFAULT-ROUTER 192.168.1.1
Router(dhcp-config)#DNS-SERVER 80.58.0.33

Router(dhcp-config)#^Z


PASO 3
Router(config)#ROUTER RIP
Router(config-router)#VERSION 2
Router(config-router)#NETWORK 200.200.200.0

Router(config-router)#NETWORK 192.168.1.0

PASO 4
Router>ENA
Router#CONFIG TE
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ROUTER RIP
Router(config-router)#VERSION 2
Router(config-router)#NETWORK 200.200.200.0

Router(config-router)#NETWORK 192.168.3.0

router 1
ip nat pool dinamico 200.200.200.8 200.200.200.20 netmask 255.255.255.0
access-list 1 permit 192.168.1.0 0.0.0.255
ip nat inside source list 1 pool dinamico
int f0/0
ip nat inside
int s0/0/0
ip nat outside

exit

show ip nat translation